Saturday, 12 July 2014

Making Pike leaders (traces) with crimps



The reason I began making my own pike leaders or traces as we call them in the uk, was the poor quality of those I found for sale in tackle shops. After losing a couple of lures though thankfully not fish to the shop bought variety I decided I could probably do better myself.
I have been making my own leaders for a few years now and I have yet to have a one fail on me although I do still manage to lose some lures to snags but it is always a snapped piece of line that comes back to me not half a broken leader. This particular leader is my standard bit of kit for middle weight lures and although it is not exactly a delicate thing it takes the abuse I tend to subject my tackle to in its stride. If I am stepping up a lure size to a glide bait I normally go down the much heavier solid wire route. But if I am perch fishing in water where pike may be present I tend to go with a light uncoated wire of about 12lb with twisted ends rather than crimps.

Although I own about six different sets of crimping pliers or crimpers I tend to stick with the Savage Gear ones because of the multi pressure points, these same plier or very similar are available from other makers like Fox and Greys. I have over time tried a number of different methods of crimping with different pliers and at this gauge of wire I really haven’t come to any conclusion as to which is best as none have failed. After doing a bit of vice testing of different methods I found the simple method I used in the video to be as good the more complex.

Length wise I tend to stay up over fourteen inches with about twelve inches being the minimum for use with a very short five foot rod I use for perch fishing. Sadly I have found a number of six inches leaders and lures stuck around the jaws of pike I have landed, these have obviously been bitten off from peoples line as they were a on the dangerously short side, but still six inch leaders are for sale in tackle shops.

See video descriptions for tools and materials list

1 comment:

  1. That is very helpful. It presented me a number of ideas and I’ll be placing them on my blog eventually. I’m bookmarking your website and I’ll be back. Thank you again!
    fishing products

    ReplyDelete